Our Team

Diploma in Mechanical Engineering and Specialization in Naval Architecture

EQ to Graduation in Naval Architecture and Shipbuilding

Post Graduate Diploma in Marine Surveying by Lloyds Maritime Academy UK

Certificates

CSWIP Welding Inspector

ISO 9001/2015 14001/2015,45001 and ISM, ISPS, MLC, Vessel Accommodation Inspection

IRCA provisional auditor for ISSO 9001:2015 and 14001:2015 IRCA Number 01184652

Risk Management & Incident Investigation Course by ABS Consulting

MLC 2006 Qualified Inspector

Marine Incident Investigation

Right ship (Dry Bulk Vetting)

Panama ASI

Professional Experience

Company Name: PT Asmi Nusantara

Designation: Director

Scope of work               : Inspections (Prepurchase, Supt Visit, ISM, ISPS, MLC, Accommodation inspection, Condition Inspections) Freelance of Ship Management, Shipbuilding Consultancy (Repair, Conversion, reactivating, life extension and Building Supt.), consultation for conversion of tanker to FSO and Third party MWS, Damage surveys, Prepare Tankers for SIRE inspections, Prepare Offshore vessels of OVID and IMCA inspections,  Investigation report. Audits of ISO 9001, 14001 & 45001, Managing / Superintendent for docking and newbuilding of vessels included in the list below. As MWS for loading and unloading of Bulk and break Cargos, Including Port Capt Job for Loading as per Stowage plan and assist in assurance of Draft survey before and after loading, Vibration  and Thermography of Cargo vessels, tankers, oil and gas installations and Industries

New Building projects:  1. INS Himgiri – Conversion to accommodate the variable depth SONAR

2. Skylark project- complete project for installation of Very low frequency communication antenna.

                                      3, Building of double skin hatch covers for a bulk carrier at PT Sembawang shipyard for Bulk carrier built at Jurong Shipyard.

4. Clean product carrier in blocks at PT Sembawang Shipyard for Atlantis.
5. 20 over Tug and Barges at PT Labroy shipyard, Batam
6. New built ASD tugs for Adsteam Marine, Australia in PT Labroy Shipyard< Batam
7. New Stainless Steel Silo for Jurong Island at PT Batamec Shipyard
8. New building tug and Barge at PT Batamec Shipyard
9. New Building Oil barge at PT Batamec Shipyard
10. Fabrication of Syncrolift platforms to replace old ones at PT Batamec Shipyard
11. New build Work over barge for PT Rig Tenders Indonesia total 3 in Number, 1 at Fujian mawei Shipyard China and 2 at PT Samudera marine Shipyard.
12. Fabrication of lifting Skid for Sapura Energy Malaysia and end clients Taiwan wind energy.

Period of Service: Jan 2013 – till to date

Job Description :

• Survey and Audits of vessels as an IRS class Surveyor till August 2021 and presently as IBS class surveyor as well as Panama ASI
• Freelance for the Job Scope above. Ships Include Bulk Carriers, Container Vessels, Oil Tankers, LPG Tankers, LNG tanker, FSO, (inclusive of pre vetting preparations for SIRE and other Flag state inspections)  Pleasure & commercial Yachts, Offshore AHTS, Pipe and Cable Layers, Survey Vessels, Jack Ups, and Tug and barges.
• New builds

Accommodation work over Barge TOBA – Batam – Indonesia

Accommodation work over Barge DUTA 7 – Fujian China

Accommodation work over Barge Kaspadu – Cilegon- Indonesia

Grillage for WPD Taiwan – Batam -Indonesia

Reactivation and Docking

1. Intan Glory 25/5-8/6/2021
2. Intan Premier 25/5-8/6/2021
3. Dong A Thetis 10-28/12/2021

Port Assesment for LNG Bunkering

1. LNG Badak, Bontang, Kalimantan, Indonesia

Company Name : PT Permata Multi Trans Marine

Designation : Director and Management Representative

Period of Service : May 2009 – Jan 2013

Job Description :

• Time chartered a BPPT survey vessel and re-chartered to Fugro Singapore for a long term charter 2 years 6 month
• Manage a utility vessel and a survey vessel as well as DPA for QHSE
• Management of tug and barge for transshipments
• During this period report directly to the board of directors on the below:

1. Budgeting on yearly basis
2. Control of subcontractors and vessel status
3. Plan and review repairs, insurance and docking
4. Marketing of the vessels for maximum utilization
5. Coordinate with class, flag and client
6. Our main clients were Fugro, PHE ONWJ, El Nusa, MGS, Orgeosisetc

Company Name : PT SMI Cilegon, Banten

Designation : Consultant New Building, Shipyard Expansion and Surveyor (Panama Flag and ICS Class)

Period of Service : Jan 2008 – May 2009

Job Description :

• Consultant for PT SMI shipyard as ship building counsultant
• Accommodation work over barges to Panama flag requirements (the barges are classed under ABS). During this period report directly to the shipyard owner on the below

1. Control of the project schedule, and coordinating with the Naval Architect in Singapore (Navnautik)
2. Pay attention to how the Quality was effected by the shipyard.
3. Help the shipyard owner on the future expansion, such as graving dock and proper utilization of yard space.
4. Liaison with the Naval architect and the class

Company Name : PT Rigtenders Indonesia, Jakarta

Designation: Senior Operation Manager/Project Engineering Manager

Period of Service: Jun 2006 – Jan 2008

Job Description:

• Contract review for all fresh contracts before commitment by the Management
• Yearly Budgeting for all vessels in our fleet presently 65 vessels
• Planning of vessel charter and their scope of work during charter period
• To provide the necessary guidance to the shore port captains and port engineers for smooth operation
• To approve all vessels requisition for purchase
• Maintain the ISO and ISM code by constant monitoring of the QHSE Dept

Company Name : PT Rigtenders Indonesia, Jakarta

Designation: Engineering Superintendent and QHSE Manager

Period of Service: Aug 2002 – June 2006

Job Description:

• To Plan, budget the engineering aspect and Docking of the fleet
• To monitor the class status of all the vessels in the fleet
• Planned and monitor the training requirement as per the ISM and ISO code and charterer’s requirement

Company Name : PT Batamec, Batam

Designation: Project Manager & QA/QC Manager

Period of Service: Feb 2001 – Aug 2002

Job Description:

• To manage new builds stainless steel silos, offshore AHTS and supply vessels
• To set up a QA/QC dept to follow up documentation for new builds Production planning & design for conversion for existing vessels

Company Name : Labroy Engg & Shipbuilding, Batam / PT Nanindah Mutiarah Shipyard

Designation: QA/QC Manager and To Implement The Management System

Period of Service: Jun 1999 – Feb 2001

Job Description:

• To prepare the company for ISO 9001.2001
• In order to achieve the above had to recruit and train existing staff
• Project manager for new builds such as Tankers and cargo vessels
• To assist the project manager in planning inspections and documentation for all new builds

Company Name : Karimun Sembawang Shipyard, Karimun

Designation: Head of QA/QC then Promoted to Project Engineer for New Builds

Period of Service: Mar 1998 – June 1999

Job Description:

• Fabrication of double skin mac gregor hatch covers
• Mid ship section for Atlatis shipyard Singapore
• Building of the wharf crane 50 ton on the Pier
• Restructuring of the middle management manager, foreman and supervisors

Company Name : Royal Yacht Squadron, Sultanate of Oman

The above squadron belongs to His Majesty Sultan Qabbos and only the few are selected from the various countries Navy ( armed forces)

Period of Service: Jan 1995 – Oct 1997

Company Name : Indian Navy India

Designation: Shipwright Artificer

Period of Service: May 1979 – Sep 1994

Job Description:

• Joined As a Shipwright Artificer for 4 year apprenticeship on mechanical engineering and ships construction this is confirm that my major experience is mainly in shipyards from new building, conversions to repair, from 1989 till 2001 (in Naval Dockyards and shipyards), from 2001 till 2013 ( owners Marine Supt which included new builds and ship repair)
• Scope for new builds covered:

1. From start of design to suit purpose of the intended vessel
2. Review of drawings
3. Coordinate with class and flag for approval of drawing and their latest requirements as per IMO and SOLAS/ latest regulations
4. Review of contracts
5. Scheduling of the projects in liaison with the yard and the owner
6. Check cuttingplans
7. Review of vendors orders to suit the requirements of the naval architect
8. On site checking of the lofting for the frames
9. Check with vendor on delivery of equipment markcritical equipment’s according to the lead time
10. Monitor the complete project
11. Commisioning along with the yard , vendor and the signing on ship crew
12. Delivery and acceptance on behalf of the owner

Brief detailed on Projects (off and on as Ship Repair Manager as required by the management):

The projects I was involved 1998-2001

1. In Indian navy was the New building of the Frigates in Mazagon Dock Mumbai, coverstion of the second Frigate INS Himgiri to install a VDS sonar, Was a team In Flight deck conversion of the Aircraft Carrier INS Vikrant (SKI JUMP to accommodate Harriers), Complete project of Skylark in Tirunelveli for the VLF transmitting station for Submarines, finally before I left the Navy I initialized the project of the patrol crafts for the Indian coast guard that was latter built in Singapore.
2. In other Shipyard, was involved in the repairs and modification of the Sultan of Oman in Bremen Shipyard Germany. In Sembawang shipyard New built Double skin Mac gregor hatch covers, Mid ship section for clean product carrier, 45 ton pier crane from the pedestal, till the boom, in PT NanindahMutiarah Shipyard, numerous tug and barges (lost count), Harbor tugs for a Adsteam Marine 6 in Number, Cable laying barge for cable and wireless UK, Ocean Plough for Cable and Wireless UK, Cattle carrier for Labroy on charter to an Australian company, PT Batamec Stainless steel silo for a Japanese petrochemical company in Jurong Island, 330 foot barges for Chuanhup Singapore, Double skin Oil barge for an Indonesian company, adding of double bottom and a heli deck for Work over barge Toba PT RIG TENDERS. Done Load out of accommodation module for Accommodation Barge.

Due to my skill and experience in the shipyard, I was called on to join PT Rig Tenders as the Marine supt, due to all the above my job is not limited only to New Bulids.

NOTE-Do refer to Mr Banerjee of Navnautik PTE LTD Singapore was the Naval Architect for five projects 2500 Dwt Double skin oil barge, Toba conversion, 300 men accommodation work barge in Mawei Shipyard China, 250 men accommodation work barge 2 in numbers at PT Samudera Marine Indonesia Shipyard Bojonegera Banten Indonesia and various projects on Modules.

Brief detailed on Positon held as QA,QC and QHSE:

All the companies, I worked for recognized the hidden talent of me pointing out defects, safety and solutions to avoid rework in shipbuilding. Plus my attitude to keep the clients confidence without disturbing the production or the bottom line of the company. I was always give the additional task of being a QA QC or the QHSE guy of the company

1. Sebawang Shipyard Karimun- Project Manager and Head of QA/QC
2. Labroy Shipbuilding- Assistant PM and QA/ QC
3. PT Batamec – Project Manager and QA/ QC
4. PT Rig tenders- Engineering Supt and QHSE Manager
5. PT Samudera Marine Indonesia Shipyard- consultant
6. PT Permata Multi Trans- Director ops and Management Rep (QHSE)

CERTIFICATE OF COMPETENCY (COC) as per STCW 2010

CERTIFICATES OF PROFICIENCY ( COP ) as per STCW 95

SEA SERVICE RECORD

DESCRIPTION OF PAST RELEVANT EXPERIENCES:

1. MV. LUMOSO HAWARI (BULK CARRIER), As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly

for a smooth Voyage and for Cargo operations.

• Executed Plan Maintenance System, Keep records all data from

alarm monitoring system and from local parameter indicators.

• Servicing and repairing Main engine and Auxiliary engine, Water Boiler or other machineries onboard as per manual instruction.
• Taken clearance record of Axial Reduction Gear and parameter indicator of Electro Hydraulic Cranes.
• Regularly testing of Emergency and Safety Device.

1. MT. LPG. FSM, As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth Voyage and for Cargo operations.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Thermal Oil Boiler or other machineries onboard as per manual instruction.
• Regularly testing of Emergency and Safety Device. Keep records and monitoring all data parameters of Gas Plant System during Cargo operation and sailing.
• Keep records and monitoring all data from Cargo Compressor System and Inert Gas System.
• Engine Control Room Equipped with NOR Control Automation.
• Controlling and Supervise installing Ballast Water Management System on board.

1. MT. SKY SHINO (OIL TANKER), As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth Voyage and for Cargo operations.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Water Boiler or other machineries onboard as per manual instruction.
• Regularly testing of Emergency and Safety Device.

1. MV. BRUPARS PERTAMA, As Chief Engineer onboard:

• Maintenance Superintendent on Dynamic Positioning Class 1 (DP1) for Anchor Handling Jobs and Running Cargo Operation and Rig Move in BRUNEI SHELL PETROLIUM (BSP).
• Keep all data records and monitoring all parameters of DP System, Main Engine, Auxiliary Engine and Anchor Handling Hydraulic system.

1. MV. PRABULAL; As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth Voyage and for Cargo operations.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Water Boiler or other machineries onboard as per manual instruction.
• Taken clearance record of Axial Reduction Gear and parameter indicator of Electro Hydraulic Cranes.
• Regularly testing of Emergency and Safety Device.

1. MT. ERAWAN 10 (OIL TANKER); As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth Voyage and for Cargo operations.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Water Boiler or other machineries onboard as per manual instruction.
• Regularly testing of Emergency and Safety Device.
• Installing Running Hour Counter for Electro Motor of Pumps

1. MT. LPG. GRIYA BORNEO; As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth Voyage and for Cargo operations.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Thermal Oil Boiler or other machineries onboard as per manual instruction.
• Regularly testing of Emergency and Safety Device.
• Keep records and monitoring all data parameters of Gas Plant System during Cargo operation and sailing.
• Keep records and monitoring all data from Cargo Compressor System and Inert Gas System. Engine Control Room Equipped with NOR Control Automation.
• Controlling and Supervise installing Fuel Additive dozing System.

1. MT. LPG. NORTHUMBERLAND; As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth Voyage and for Cargo operations.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Thermal Oil Boiler or other machineries onboard as per manual instruction.
• Regularly testing of Emergency and Safety Device.
• Keep records and monitoring all data parameters of Gas Plant System during Cargo operation and sailing.
• Keep records and monitoring all data from Cargo Compressor System and Inert Gas System. Engine Control Room Equipped with NOR Control Automation.

1. MV. HIMS-11 and MV. ATLANTIC-18; As Chief Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth for Anchor Handling Jobs and Running Cargo Operation and Rig Move under ARAMCO chartered.
• Keep all data records and monitoring all parameters of DP System, Main Engine, Auxiliary Engine and Anchor Handling Hydraulic system.

1. MV. BAHAMAS CELEBRATION, Cruise Ship As Second Engineer onboard:

• Ensure all machineries onboard readiness and works properly for a smooth Voyage and for Embark/Disembark Passengers.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Water Boiler or other machineries onboard as per manual instruction.
• Regularly testing of Emergency and Safety Device.
• Regularly check and Testing of Drinking Water Treatment, Boiler Water Treatment and Cooling Water Treatment.

1.  MV. TIAN SAN & MV. PENGUIN, Passenger Ferry; As Port Engineer and Supervisor under Bukom Shell Petroleum (Singapore),

• Ensure all Fleet readiness and works properly for a smooth Voyage and for Embark/Disembark Passengers.
• Executed Plan Maintenance System, Keep records all data from alarm monitoring system and from local parameter indicators.
• Servicing and repairing Main engine and Auxiliary engine, Water Boiler or other machineries onboard as per manual instruction.
• Regularly testing of Emergency and Safety Device. Report and submit all data parameter and Ship performance to Shell Marine Department.

I hereby certify that the information contained in this form is complete & correct. I understand that the

Company may terminate my service at any time if any of the above information is found to be false.

______GresnaJembar_____

Signature of the Applicant